9.7 PBX Configuration—[1-1]Configuration—Slot—UM Port PropertyThe properties of the Unified Messaging (UM) system’s ports can be specified.MainThe Port for each item is displayed for your reference. For details, see Common Programming ReferenceItems in 9.1 PBX Configuration—[1-1] Configuration—SlotExtension NumberSpecifies the extension number of the port.Value RangeMax. 5 digits (consisting of 0–9)Maintenance Console Location9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port PropertyConnectionIndicates the port status. To change the status of the port, click the desired cell in the column, and then selectINS or OUS for the port.This option is only available in On-line mode.Value RangeINS: The port is in service.OUS: The port is out of service.Fault: The port is not communicating with the network.Maintenance Console Location9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port PropertyPC Programming Manual References9.1 PBX Configuration—[1-1] Configuration—Slot–To change the status (INS/OUS) of a card (On-line modeonly)UM Group NumberSelects the number of the UM group.Value Range1–16Maintenance Console Location9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port Property262 PC Programming Manual9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
