11.2 PBX Configuration—[3-2] Group—User GroupExtensions can be assigned to a tenant according to their extension user groups. An extension user group canbelong to only one tenant. However, one extension user group can belong to several call pickup groups andseveral paging groups. A maximum of 32 or 128 tenants can be programmed.NoteThe maximum number of tenants depends on the System Capacity Selection setting made when theEasy Setup Wizard was run for the PBX. If the System Resource Type was selected, the maximumnumber of tenants is 128. If the Standard Type or IP-Extension Type was selected, the maximum numberof tenants is 32. For details, see "5.4.1 Easy Setup Wizard" in the Installation Manual.User Group NameSpecifies the name of the extension user group.Value RangeMax. 20 charactersMaintenance Console Location11.2 PBX Configuration—[3-2] Group—User GroupPC Programming Manual References11.3 PBX Configuration—[3-3] Group—Call Pickup Group11.4 PBX Configuration—[3-4] Group—Paging Group12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main— User Group12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main— User GroupFeature Guide References5.1.2 GroupTenant NumberSpecifies the tenant to which the extension user group belongs.Value Range1–32 or 1–128NoteThe maximum number of tenants depends on the System Capacity Selection setting made when theEasy Setup Wizard was run for the PBX. If the System Resource Type was selected, the maximumnumber of tenants is 128. If the Standard Type or IP-Extension Type was selected, the maximum numberof tenants is 32. For details, refer to "5.4.1 Easy Setup Wizard" in the Installation Manual.Maintenance Console Location11.2 PBX Configuration—[3-2] Group—User Group594 PC Programming Manual11.2 PBX Configuration—[3-2] Group—User Group
