23.4 UM Configuration—[4-4] ServiceSettings—Holiday TableHolidays can be set for and assigned to trunks and Unified Messaging ports. When a call is received from acertain trunk or by a certain subscriber during the time frame set for an assigned holiday, the call handlingsettings for that holiday will be used. This screen is similar to the table found in 10.5 PBXConfiguration—[2-5] System—Holiday Table. You can also access the PBX Holiday Table directly by clickingthe PBX Holiday Table tab. A maximum of 24 different holidays can be programmed.SettingEnables the setting of the holiday. This setting synchronises with the PBX’s Holiday Table.Value RangeEnable, DisableMaintenance Console Location23.4 UM Configuration—[4-4] Service Settings—Holiday TablePC Programming Manual References10.5 PBX Configuration—[2-5] System—Holiday Table— Holiday Table—SettingFeature Guide References3.2.1.21 Holiday ServiceName of HolidaySpecifies the name of the holiday setting for later reference.Value RangeMax. 32 CharactersMaintenance Console Location23.4 UM Configuration—[4-4] Service Settings—Holiday TableFeature Guide References3.2.1.21 Holiday ServiceStart Date (Month Day)Specifies the month and day of the holiday start date. Click the cell to display a calendar. Select a month usingthe arrow buttons, and click on a day for the selected month. This setting synchronises with the PBX’s HolidayTable.Value RangeMonth and DayPC Programming Manual 95123.4 UM Configuration—[4-4] Service Settings—Holiday Table
