18.3.2 PBX Configuration—[10-3] CO & Incoming Call—DDI / DIDTable—Name GenerateName Generate allows DDI/DID names to be programmed at once for a set of locations in series.If a name generated here is longer than 20 characters, the additional characters will be discarded.Beginning Entry LocationSpecifies the number of the first location to be programmed.Value Range1–1000Maintenance Console Location18.3.2 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Name GeneratePC Programming Manual References18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID TableFeature Guide References2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)Number to GenerateSpecifies the number of locations to be programmed.Value Range1–1000Maintenance Console Location18.3.2 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Name GeneratePC Programming Manual References18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID TableFeature Guide References2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)No. of Digits to DeleteSpecifies the number of digits to be deleted from the start of a DDI/DID number when using it as part of theDDI/DID name.Value Range0–32PC Programming Manual 82518.3.2 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Name Generate
