12.3 PBX Configuration—[4-3] Extension—DSSConsoleA DSS Console can be used in conjunction with a PT connected to the same PBX. The DPT Type—Type ofthe extension port that DSS Console is connected must be set to DSS in the Port Property screen of theextension card that the DSS console is connected to. For details, see To access port properties in 9.1 PBXConfiguration—[1-1] Configuration—Slot.NoticeThis screen is for programming legacy gateway PBXs. For information about setting up a legacy gatewayPBX, see 9.29 PBX Configuration—[1-1] Configuration—Slot—Legacy-GW1/Legacy-GW2.Unless noted otherwise, the programming information is the same as described in the PC ProgrammingManual of the legacy gateway PBX. Refer to the corresponding Extension—DSS Console section in thePC Programming Manual of the legacy gateway PBX for more information.To copy DSS Console setting values from one location to another, click the Copy to button.Once DSS console buttons have been programmed, the Terminal Label Print utility can be used to print labelsheets, which can be attached to DSS consoles for quick reference. For details, see 1.2.2.1 Editing andPrinting Terminal Labels in Off-line Mode.PC Programming Manual 74112.3 PBX Configuration—[4-3] Extension—DSS Console
