14.6 PBX Configuration—[6-6] Feature—TenantA maximum of 32 or 128*1 tenants can share the PBX. Each tenant is composed of specified extension usergroups. The PBX offers each tenant its own Time Table and system resources.To assign extensions as operators easily, click Extension No. Setting (see 2.1.7 Extension NumberSetting).*1 The maximum number of tenants depends on the System Capacity Selection setting made when the Easy Setup Wizard was runfor the PBX. If the System Resource Type was selected, the maximum number of tenants is 128. If the Standard Type orIP-Extension Type was selected, the maximum number of tenants is 32. For details, refer to "5.4.1 Easy Setup Wizard" in theInstallation Manual.Music On HoldSpecifies the audio source to be used for Music on Hold.Value RangeSame as System Setting, BGM1, BGM2, BGM3, BGM4, BGM5, BGM6, BGM7, BGM8, ToneMaintenance Console Location14.6 PBX Configuration—[6-6] Feature—TenantPC Programming Manual References10.2 PBX Configuration—[2-2] System—Operator & BGMFeature Guide References2.13.4 Music on Hold5.1.3 Tenant ServiceOperator (Extension Number)Specifies the extension number or the floating extension number of an incoming call distribution group to bedesignated as the tenant operator. When this parameter is left unspecified, the PBX operator serves as thetenant operator.Value RangeMax. 5 digits (consisting of 0–9)Maintenance Console Location14.6 PBX Configuration—[6-6] Feature—TenantPC Programming Manual References10.2 PBX Configuration—[2-2] System—Operator & BGMFeature Guide References5.1.3 Tenant Service5.1.5 Operator Features776 PC Programming Manual14.6 PBX Configuration—[6-6] Feature—Tenant
