Maintenance Console Location10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—MainPC Programming Manual References10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Optional Device & OtherExtensions— Remote Operation by Other ExtensionFeature Guide References2.7.5 Walking COS2.7.6 Verification Code EntryWireless XDP Parallel Mode Set / CancelSpecifies the feature number used to set or cancel Wireless XDP Parallel mode.Value RangeMax. 4 digits (consisting of 0–9, *, and #)Maintenance Console Location10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—MainPC Programming Manual References10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Optional Device & OtherExtensions— Accept Wireless XDP Parallel Mode Set by PSFeature Guide References5.2.4.5 Wireless XDP Parallel ModeAccount Code EntrySpecifies the feature number used to enter an Account Code.Value RangeMax. 4 digits (consisting of 0–9, *, and #)Maintenance Console Location10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—MainFeature Guide References2.5.4.3 Account Code EntryCall Hold / Call Hold RetrieveSpecifies the feature number used to hold a call or retrieve a call on hold from the holding extension.494 PC Programming Manual10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
