Subscriber’s Manual115A2.8 Two-way Recording (TWR) Button AssignmentFor the Two-way Recording feature to work at an extension, the extension must havea TWR button. This button must either be a DSS/BLF or CO button with a lamp. Followthe procedure below to assign a TWR button on an extension. (This is station levelprogramming and should be done at each individual telephone.) PC programming isalso available (see A2.12 Button Assignment via PC Programming).1. Enter Personal Programming:While on-hook, press the PROGRAM button.(Display changes to PT-PGM Mode.)2. Press the desired Flexible (CO or DSS/BLF) button that you want to assign as theTWR button.3. Press [90].Screen output: 2WAY-REC-4. Enter a Voice Mail floating extension number.Screen output: 2WAY-REC- _ _ _(_ _ _ = The Voice Mail floating extension number you entered).5. Press the STORE button.6. Press the PROGRAM button or lift the handset to exit the Personal Programmingmode.7. Repeat these steps for each telephone.Conditions: This button must be a flexible (CO or DSS/BLF) button to beprogrammed as a TWR button. When all Voice Mail portsare busy and this key is pressed, the user will hear awarning tone.
