Subscriber’s Manual139A3.11 Voice Mail Transfer Button AssignmentThis feature allows an extension user to transfer calls directly to a mailbox. This isavailable with both DPT and Inband Integration.PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12Button Assignment via PC Programming).1. Enter PITS Programming:a. While on-hook, press the PROGRAM button or set the MEMORY switch to"PROGRAM".b. Enter [99]. (This step is not needed for KX-TA624 and KX-TA824.) The displaychanges to PT-PGM Mode.2. Press the desired Flexible (CO or DSS/BLF) button that you wish to assign as theVTR button.3. Enter the programming number.KX-TD: [8]KX-TA1232: [8]KX-TA: [94]Screen output: VTR4. Dial the Voice Mail extension number.Screen output: VTR- _ _ _(_ _ _ = The extension number you entered).5. Press the STORE button.6. To exit the Personal Programming mode, press the PROGRAM button or set theMEMORY switch to "SET".7. Repeat these steps for each telephone.Conditions:This button must be a CO or DSS/BLF key to beprogrammed as a VTR button. When all Voice Mail ports arebusy and this key is pressed followed by an extensionnumber, the user will hear either a dial tone or a busy tone,depending on the Call Waiting on VM Group setting on thePBX.
