Subscriber’s Manual118A2.11 Voice Mail Transfer (VTR) Button AssignmentFor the Voice Mail Transfer feature to work at an extension, the extension must havethe VTR button. This button must either be a DSS/BLF or CO button with a lamp.Follow the procedure below to assign a VTR button on an extension. (This is stationlevel programming and should be done at each individual telephone.) PC programmingis also available (see A2.12 Button Assignment via PC Programming).1. Enter Personal Programming:While on-hook, press the PROGRAM button.(Display changes to PT-PGM Mode.)2. Press the desired Flexible (CO or DSS/BLF) button that you want to assign as theVTR button.3. Press [94].Screen output: VTR-4. Enter a Voice Mail floating extension number.Screen output: VTR- _ _ _(_ _ _ = The Voice Mail floating extension number you entered).5. Press the STORE button.6. Press the PROGRAM button or lift the handset to exit the Personal Programmingmode.7. Repeat these steps for each telephone.Conditions: This button must be a flexible (CO or DSS/BLF) button to beprogrammed as a VTR button. When all Voice Mail ports arebusy and this key is pressed followed by an extensionnumber, the user will hear either a dial tone or a busy tone,depending on the Call Waiting on VM Group setting on thePBX.
