Subscriber’s Manual496. Go on-hook.Changing Device Numbers1. Log in to your mailbox.• See 2.1 Logging in to YourMailbox if necessary.2.3. Enter the desired device number(1–3).4. to change the assignednumber.• To delete the assigned number,press [3] then go on-hook tofinish.5. Enter the outside line accessnumber needed for making outsidecalls.• To store an extension number,simply enter the extensionnumber then continue fromstep 7.6. Enter the outside telephonenumber (including area code ifneeded).• To insert a pause or specialcommand in the middle of thetelephone number, pausemomentarily while entering thetelephone number. The VPSwill announce a list of availableoptions, for example, "To inserta pause, press [5]. Press [4] tocontinue entering thetelephone number.".• If you insert a beeper displaycommand here, the VPS willprompt callers to enter theirtelephone numbers. Callertelephone numbers can thenbe sent to your beeper. Thisfeature may be disabled foryour mailbox.7. to accept.8. if the assigned number is atelephone number.if the assigned number is abeeper number.9. Go on-hook.Note• If your PBX uses PRI lines, you mayneed to enter [#] at the end of outsidetelephone numbers. Consult yourSystem Administrator for moreinformation.5 31212
