Subscriber’s Manual130A3.5 Live Call Screening Private/Hands-Free ModeAssignmentThis program assigns a VPS response for when a message is being left in a mailbox.It determines whether an alert tone is sent or whether the recorded message is playedthrough the built-in speaker of the extension. The default mode is hands-free. (Thisitem should be programmed by each extension user through Personal Programming.)PC programming is also available for KX-TD500 and KX-TA824 users (see A3.6 LiveCall Screening Assignment via PC Programming).1. Enter Personal Programming:a. While on-hook, press the PROGRAM button or set the MEMORY switch to"PROGRAM".b. Enter [99]. (This step is not needed for KX-TA624 and KX-TA824.) The displaychanges to PT-PGM Mode.2. Enter the code that corresponds to the mode you want this telephone to have.For Hands-free mode:KX-TD: [71]KX-TA1232: [71]KX-TA: [#11]For Private mode:KX-TD: [72]KX-TA1232: [72]KX-TA: [#12]Screen output: Hands-Free or Private3. Press the STORE button.4. To exit the Personal Programming mode, press the PROGRAM button or set theMEMORY switch to "SET".5. Repeat these steps for each telephone.A single line telephone that is connected to the same extension as a proprietarytelephone can also be used to monitor an incoming message (not available for KX-TA).Be sure that Live Call Screening on the connected proprietary telephone has beenactivated. This feature is useful when you are using a cordless telephone. A tonesounds to alert the subscriber that a message is being recorded. To intercept the call,flash the hook.
