Panasonic Lumix DC-TZ220D Operating Instructions Manual

137Stabiliser, Zoom and FlashCorrecting jitter●When you use a tripod, we recommend setting [Stabilizer] to [OFF].●[Stabilizer] cannot be used by selecting [ ] (Normal) in Panorama Shot Mode.●In the following cases, the [Stabilizer] will switch to [ ] (Normal), even if it is set to [ ](Panning):• During motion picture recording• When recording 4K photos• When recording using [Post Focus]●[Stabilizer] cannot be used when recording with [High Speed Video].●The 5-axis Hybrid Image Stabiliser function automatically functions while recording motionpictures. This decreases the jitter of the image when recording motion pictures while zooming orwalking, etc.• The recording range may become narrower.●In the following cases, The 5-axis Hybrid Image Stabiliser function is not available.• When using the Digital Zoom• When recording motion pictures with [Rec Quality] set to [4K/100M/30p]/[4K/100M/25p] or[4K/100M/24p]• When recording using [4K Live Cropping]●Cases where the stabiliser function may be ineffective:• When there is a lot of jitter• When the zoom magnification is high (also in the Digital Zoom range)• When taking pictures while following a moving subject• When the shutter speed becomes slower to take pictures indoors or in dark places●The panning effect by selecting [ ] is not fully achieved in the following cases:• Bright summer days or other bright locations• When the shutter speed is higher than 1/100 seconds• When the motion of a subject is slow and the speed with which the camera is moved is too slow(a nice background blur is not achieved)• When the camera is not adequately tracking the motion of a subject