Panasonic Lumix DC-TZ220D Operating Instructions Manual

54Recording modeTaking pictures with automatic settings (Intelligent Auto Mode)• When the camera identifies [ ] as the optimal scene and if the camera determinesthat jitter is reduced by the use of a tripod or by other means, a shutter speed thatis slower than usual is selected. After pressing the shutter button, do not move thecamera while recording.• When recording 4K photos or when recording using [Post Focus], Scene Detectionworks the same way as when recording motion pictures.●Depending on recording conditions, different scene types may be determined for the samesubject.About Backlight CompensationBacklight compensation is automatically activated in Intelligent Auto Plus Mode or Intelligent AutoMode. Backlight is a condition where a light shines from behind a subject. When there is a backlight,the subject appears darker and the camera will automatically attempt to correct it by increasing thebrightness of the picture.[Intelligent Auto] menuTaking pictures using a handheld camera ([iHandheld Night Shot])Recording mode:If a night scene is detected automatically while the unit is being handheld, [iHandheldNight Shot] can record a still picture with less jitter and less noise without using a tripodby combining a burst of pictures.→ / [Intelligent Auto] → [iHandheld Night Shot]Settings: [ON] / [OFF]●The angle of view becomes narrow slightly.●After the shutter button has been pressed, do not move the camera during the burst operation.●The flash is fixed to the [ ] (Forced Flash Off) setting.●This function will not work for still pictures while motion pictures are being recorded.●This function is not available in the following cases:• When using [Burst]• When recording 4K photos• When recording using [Post Focus]• When recording using [Bracket]• When [Quality] is set to [ ], [ ] or [ ]• When using [Time Lapse Shot]• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]