Panasonic Lumix DC-TZ220D Operating Instructions Manual

178Using Menu FunctionsMenu list[Multi Exp.]Recording mode:You can create an effect similar to the operation of up to four times of exposure on asingle picture.→ [Rec] → [Multi Exp.]1 Press to select [Start] and press [MENU/SET]2 Decide on your composition and take the first picture• After recording the first picture, press the shutter button halfwayto proceed to the next recording.• Press to select the item and press [MENU/SET]. You canperform the following operations.– [Next]: Proceed to the next recording.– [Retake]: Delete the result of the last shot and take anotherpicture.– [Exit]: Exit Multi Exposure and save the picture that was taken.NextRetakeExit3 Record the second, third, and fourth pictures• When you press [Fn3] button while taking pictures, the picturesthat you took are saved and Multi Exposure is closed.RetakeExit4 Press to select [Exit] and press [MENU/SET]• You can also end the operation by pressing the shutter buttonhalfway.■ Changing the settings[Auto Gain] If you select [OFF], all exposure results are superimposed as they are.Compensate the exposure as necessary, depending on the subject.[Overlay]If you select [ON], you can apply Multi Exposure to previously recordedpictures. After [Start] is selected, pictures on the card will be displayed. Selecta RAW image, and press [MENU/SET] to proceed to recording.●When you take the second and subsequent pictures, you cannot perform zoom operation.●Information for the picture taken last will be used as recording information of pictures taken usingMulti Exposure.●You can perform [Overlay] on RAW file pictures recorded using this camera only.●This function is not available in the following cases:• When using [Time Lapse Shot]• When using [Stop Motion Animation]