Panasonic Lumix DC-TZ220D Operating Instructions Manual

155Recording motion picturesRecording Snap MoviesSetting up [Pull Focus]Set the frames that specify the positions where the [PullFocus] starts (first position) and stops (second position).Touch operationTouch a subject (first position), drag your finger to the desired location (second position),and release the finger.• To cancel the frame settings, touch [ ].Button operationAssign [AF Mode] to a function button ([Fn1] - [Fn4]) (→47)Press the function button that [AF Mode] has assigned to at stepPress to move the frame, and press [MENU/SET] (First position)• If you press [DISP.] button before pressing [MENU/SET], the frame will return to the centre.Repeat step (Second position)• To cancel the frame settings, press [MENU/SET].●A greater effect can be achieved by creating a striking contrast of focus between the startand end positions, for example by shifting focus from the background to foreground, or viceversa.●After setting focus, try to keep the distance between the subject and the camera constant.●When the camera fails to set the frame, it returns to the first position.●When [Pull Focus] is set to [ON]• Auto Focus Mode will be switched to [ ], a setting specially designed for [Pull Focus].• If you take a picture, the Auto Focus operation [ ] will take place at the first frame position.●When [Metering Mode] is set to [ ] (Spot), the spot metering target is fixed at the start position(first position) of [Pull Focus].●This function is not available in the following cases:• In Manual Focus• When using the Digital Zoom