Panasonic Lumix DC-TZ220D Operating Instructions Manual

189Using Menu FunctionsMenu list→ [Custom] → [Monitor / Display][Highlight]You can set overexposed areas (areas that are too bright and where there are no shadesof grey) to flash on the screen when the [Auto Review] function is activated or duringplayback.●To reduce overexposed areas, record a picture by setting negativeexposure compensation using the histogram display and so on as areference.●This feature is disabled during 4K photo playback, playback of picturesrecorded in [Post Focus], Multi Playback, Calendar Playback, orPlayback Zoom.●This does not affect recorded pictures.[Zebra Pattern]You can check the area in a picture, which could result in overexposure, by displayingsuch an area using a zebra pattern.[ZEBRA1]: [ZEBRA2]:Select [SET] to set the brightness to be displayed for each zebra pattern.• The range of brightness you can select from is [50%] to [105%]. The [OFF] setting isavailable for [Zebra 2]. When [100%] or [105%] is selected, only the overexposed areasare displayed with the zebra pattern. When a smaller numeric value is set, the range ofbrightness to be displayed by each zebra pattern will increase.●To reduce overexposed areas, record a picture by setting negative exposure compensation usingthe histogram display and so on as a reference.●The displayed zebra pattern is not recorded.●When [Zebra Pattern] is assigned to the function button using [Fn Button Set] (→47) in the[Custom] ([Operation]) menu, every time you press the assigned function button, the setting willswitch in the following order: [Zebra 1] → [Zebra 2] → [Zebra OFF]. When [Zebra 2] is set to[OFF], you can switch the setting quickly in the following order: [Zebra 1] → [Zebra OFF].