Panasonic Lumix DC-TZ220D Operating Instructions Manual

260Wi-Fi/Bluetooth[Wi-Fi Setup]Configure the settings required for the Wi-Fi function.[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.→ [Setup] → [Wi-Fi] → [Wi-Fi Setup][Priority of Remote Device] (→235)[Wi-Fi Password]You can improve securityby enabling password entryfor a direct connection to asmartphone.[ON]: Connects the camera and a smartphone using an SSID andpassword. (→231)[OFF]: Connects the camera and a smartphone using an SSID.(→230)• When [ON] is selected, you can also set up a connection byscanning a QR code.[PC Connection]You can set the workgroup.You must connect to the same workgroup as the destinationcomputer when sending pictures to the computer.(The default is set to “WORKGROUP”)Press [MENU/SET]Enter the workgroup of the connecting PC• For details on how to enter characters, refer to “Entering Text”(→51)• Pressing [DISP.] button will return the default setting[Device Name]You can change the name(SSID) of this unit.Press [DISP.] buttonEnter the desired device name (Up to 32 characters can beentered)• For details on how to enter characters, refer to “Entering Text”(→51)[Wi-Fi Function Lock]To prevent incorrect operationor use of the Wi-Fi functionby a third party and to protectsaved personal information,it is recommended that youprotect the Wi-Fi function witha password.[Setup]: Enter any 4-digit numbers as the password.[Cancel]• For details on how to enter characters, refer to “Entering Text”(→51)• If you forget the password, you can reset it with [Reset NetworkSettings] (→204) in the [Setup] menu.[Network Address]Displays the MAC address andIP address of this unit.• A “MAC Address” is a unique address that is used to identifynetwork equipment.• “IP address” refers to a number that identifies a PC connected toa network such as the Internet. Usually, the addresses for homesare automatically assigned by the DHCP function such as awireless access point. (Example: 192.168.0.87)