Panasonic Lumix DC-TZ220D Operating Instructions Manual

286OthersQ&A Troubleshooting■ RecordingStriping or flicker may appear under lighting such as fluorescent lighting and LED lightingfixture.• This is characteristic of MOS sensors which serve as the camera’s pickupsensors. This is not a malfunction.• If you are taking still pictures using the electronic shutter, the striping may bereduced by setting a slower shutter speed. (→59)• When noticeable flicker or striping is seen under lighting such as a fluorescentor LED lighting fixture in the motion picture recording mode, you can reducethe flicker or striping by setting up [Flkr Decrease] (→179) and fixing theshutter speed. It is possible to select a shutter speed from [1/50], [1/60],[1/100], or [1/120]. You can set the shutter speed manually in the CreativeVideo Mode. (→77)Cannot record pictures. The shutter will not operate immediately when the shutter button ispressed.• When [Focus/Release Priority] is set to [FOCUS], the camera will not record until proper focusing isachieved. (→184)Recorded pictures look white.• Lens is dirty (fingerprints, etc.).→ Turn the camera on to extract lens barrel, and clean lens surface with a soft, dry cloth.Recorded pictures are too bright/too dark.• AE Lock (→99) is set inappropriately.Some pictures are taken when I press the shutter button just once.• Drive Mode is set to other than [Single]. (→123)• Bracket recording is set. (→127)Focus not aligned correctly.• Subject outside of focus range.• [Focus/Release Priority] is set to [RELEASE]. (→184)• [Shutter AF] is set to [OFF]. (→182)• AF Lock (→99) is set inappropriately.• If there are fingerprints or dirt on the lens, the focus may be set to the lens and not the subject.Recorded pictures are blurred. The stabiliser function ineffective.• Shutter speed is slower in dark locations and the stabiliser function is less effective.→ Use a tripod and the self-timer (→126) when using a slower shutter speed.