Panasonic Lumix DC-TZ220D Operating Instructions Manual

284OthersMessage displays■ Wi-Fi function[Failed to connect wireless access point] / [Connection failed] / [No destination found]• The wireless access point information set on this unit is wrong. Check the authentication type,encryption type, and encryption key. (→255)• Radio waves from other devices may block the connection to a wireless access point. Check otherdevices that are connected to the wireless access point and devices that use the 2.4 GHz band.[Connection failed. Please retry in a few minutes.] / [Network disconnected. Transfer stopped.]• Radio waves from the wireless access point are getting weak. Perform the connection closer to thewireless access point.• Depending on the wireless access point, connection may be automatically disconnected afterspecific time has passed. Reconnect the connection again.[Connection failed]• Change the access point to connect to in the smartphone Wi-Fi settings to this camera.■ Others[Some pictures cannot be deleted] / [This picture cannot be deleted]• Non-DCF pictures (→156) cannot be deleted. Save needed data on a computer or other device,and then use [Format] on the camera. (→27)[Cannot be set on this picture]• [Title Edit], [Text Stamp], and other functions cannot be used for pictures that are not compliant withthe DCF standard (→156).[A folder cannot be created]• A folder cannot be created because available folder numbers have been already assigned.Save all necessary pictures to your computer or other devices and format the card (→27).After you format the card, execute [No.Reset] in the [Setup] menu to reset the folder number to100. (→204)[Please turn camera off and then on again] / [System Error]• Turn the camera on again. (Consult the dealer or your nearest Service Centre if display stillremains.)