Panasonic Lumix DC-TZ220D Operating Instructions Manual

226Wi-Fi/BluetoothConnecting the camera to a smartphoneYou can remotely operate the camera using a smartphone.The “Panasonic Image App” (hereafter “Image App”) must be installed on yoursmartphone.Installing the smartphone/tablet app “Panasonic Image App”Supported OS Android™:Android 4.4 or later(Android 5.0 or higher is required to use the Bluetoothfunction)iOS: iOS 9.3 or later (The Bluetooth function cannot be used with the iPad 2)InstallationprocedureConnect your device to a network(Android) Select “Google Play™ Store”(iOS) Select “App Store”Enter “Panasonic Image App” or “LUMIX” into the search boxSelect “Panasonic Image App” and install it• Use the latest version.• Supported OS versions as of August 2022. Supported OS versions may be changedwithout prior notice.• The service may not be able to be used properly depending on the type of smartphonebeing used.For the latest information on the “Image App”, refer to the support site below.https://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)• When downloading the app on a mobile phone network, high packet communicationfees may be incurred depending on the details of your contract.• For details about the operating procedure, etc., refer to [Help] in the “Image App” menu.• When you operate the “Image App” on the smartphone that is connected to thecamera via Wi-Fi, [Help] in the “Image App” may not be displayed depending on thesmartphone. In this case, after terminating the connection to the camera, reconnect thesmartphone to a mobile phone network or to a Wi-Fi router, and then display [Help] inthe “Image App”.• Some of the screens and information provided in this document may be differentdepending on the supported operating system and “Image App” version.