Panasonic Lumix DC-TZ220D Operating Instructions Manual

91Focus, Brightness (Exposure) and Colour tone SettingsTaking pictures with Auto FocusChanging the position and size of the AF areaRecording mode:When [ ], [ ], [ ], or [ ] in Auto Focus Mode is selected, you can change theposition and size of the AF area. With [ ], you can set the lock-on position.• Perform these operations with the touch shutter function released.• You can also display the AF area setting screen by touching the recording screen.→ [Custom] → [Operation] → [Touch Settings] → [Touch AF]→ [AF]• You can use the [Custom] ([Focus / Release Shutter]) menu to set the display methodfor the AF area according to your preference. (→181)●When you set [Metering Mode] to [ ] (spot-focusing), the metering target will move along withthe AF area.●The position and size of the AF area cannot be changed in the Digital Zoom range.■ When selecting [ ] / [ ] / [ ]→ [Rec] / [Motion Picture] → [AF Mode]Select [ ], [ ] or [ ] and press• The AF area setting screen appears.To change the AF areaOperation Touch operation DescriptionTouch To move the position of the AF area.— Pinch out /Pinch in Enlarges/reduces the AF area in small steps.*— Enlarges/reduces the AF area in large steps.*[DISP.] [Reset]Resets the AF area back to the centre.• If you press the button again, the frame size will bereset to the initial setting.* Not available when [ ] is selected.Press [MENU/SET]• AF area with the same function as [ ] is displayed in the touched position, when the [ ] isselected. Setting of the AF area is cleared when [MENU/SET] is pressed or [ ] is touched.