Panasonic Lumix DC-TZ220D Operating Instructions Manual

227Wi-Fi/BluetoothConnecting the camera to a smartphoneConnecting the camera to a smartphone compatible withBluetooth Low EnergyYou can connect the camera to a smartphone via a Bluetooth connection.SupportedsmartphonesAndroid: Android 5.0 or higher equipped with Bluetooth 4.0 or higher(excluding those that do not support Bluetooth low energy)iOS: iOS 9.3 or higher (excluding the iPad 2)■ First-time connectionYou need to set up pairing (connection) for the first time only. When pairing is set up, aWi-Fi connection is made automatically.(On the camera)→ [Setup] → [Bluetooth] → [Bluetooth]→ [SET] → [Pairing]• The camera enters pairing standby mode and displays itsdevice name.(On your smartphone)Start “Image App”• If a message is displayed indicating that the smartphone is searching for cameras, close themessage.Select [Bluetooth]Turn on the BluetoothSelect the device name displayed on the camera’s screen from the [Camera enable tobe registered] list• Bluetooth connection between the camera and the smartphone will be made.(For Android devices) A Wi-Fi connection will be made by selecting [Connection].If you are using an Android device, follow the steps up to here to complete the setup.Proceed to the steps below only if you are using an iOS device (iPhone/iPod touch/iPad).• If [Wi-Fi Password] (→260) is set to [OFF] on the camera, select [Wi-Fi Setup]. (At the time ofpurchase, [Wi-Fi Password] is set to [OFF])• If [Wi-Fi Password] is set to [ON] on the camera, you need to install the profile.Install the profile• If the smartphone is locked with a passcode, enter the passcode to unlock the smartphone.Exit the browser