235Wi-Fi/BluetoothControlling with a Smartphone■ Turning off the camera with the smartphoneSelect [ ]Select [ OFF]●When [Remote Wakeup] is set to [ON], the Bluetooth function continues to operate even after thecamera is turned off, thus causing the battery to drain.Operating the shutter button of the camera using asmartphone (remote recording)Wireless connectivity required: Wi-Fi1 Connect to a smartphone (→226)2 Operate the smartphoneIf the camera is already connected to the smartphone via Bluetooth, select [ ] → [Remoteoperation].(iOS devices) Depending on the connection status of the smartphone, you may need to change theconnected device on the Wi-Fi setup screen. Follow the on-screen message on the smartphone tochange the setting.Select [ ]Take pictures• The recorded images are saved in the camera.• Some settings are not available.■ Setting the higher priority between the camera and smartphone to performoperations→ [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [Priority of Remote Device][Camera] Allows you to perform operations with both the camera and the smartphone.• The camera’s dial settings, etc. cannot be changed with the smartphone.[Smartphone]Allows you to perform operations only with the smartphone during remoterecording.• The camera’s dial can also be operated with the smartphone.• To end remote recording, press any of the buttons on the camera to turnon the screen, and select [Cancel].• The setting of this function cannot be changed while the connection is active.