113To capture and transfer the image of PC screenThe user can capture the screen currently displayed on the PC monitor and transmitit to the projector or saved it in the PC.Before transmitting an imageIt is necessary to switch the input of the projector beforesending an image to the projector by Wireless Manager.Switch to "NETWORK" using the input selector(INPUT, RGB) button of the projector or the remotecontrol.Functions on the "Capture" windowWhen you right-click the icon on the task bar and choose "Capture", the "Capture"window is displayed.1. "Full screen" buttonA full screen of the PC is captured.The screen is kept blank during the imagecapture process and it will be displayed againwhen the capture is completed. The capturedimage is displayed on PictureBox.The process during the capture is displayed inscheduled process window (8).For details of the setting of the process during thecapture, refer to "Capture" in the option screen.2. "Area" buttonThe user can specify an area on the PC screenand capture the image within the area.The "Capture" window is kept blank during thearea definition process. Use the mouse to clipthe area to be captured. When the clipping iscompleted, the image is captured and displayedin the PictureBox of the "Capture" window.3. "Scope" buttonA specified window on the PC monitor can be captured as an image.The image will be captured when the Scope button is dragged with the mouseand dropped on the desired window to be captured.4. "Transmission" buttonThe image displayed in the PictureBox of the "Capture" window is transmitted tothe projector.For details, refer to "Registration of projector".5. "Full size" buttonThis button toggles the "Capture" windowbetween the full size and the minimum size.6. "Option" buttonThe user can define the conditions forcapturing an image.On the Option screen, the user can specifythe type of capture format, after-captureprocessing and the delay time for capturing.NETWORK8126 7435
