114Note:• Images can be captured in three different formats (PNG, JPEG, BMP).• As for JPEG, data compression ratio can be optionally specified.• For the process after the capture, the user can choose either capturing andtransmitting the screen or saving the image.• If capturing and transmitting the screen is selected, the image is transmitted to theprojector immediately after the capture. In this case, the indication in Window 8 willbe "The image will be transmitted when it is captured".Uncheck this option if you want to transmit the captured image after verifying it.If saving the image is selected, the captured image will be saved in the specified folder.In this case, "Capture only" is displayed in part 8.• The image is saved in the format specified in the capture format.• The delay time for capture can be set when the image you want to capture is notdisplayed immediately.• The range of delay time setting is 1 to 30 seconds.This value depends on the hardware of your PC as well as the operatingapplications. Try to capture several images into your PC to determine the bestvalue to choose.7. "Close" buttonThis button quits the "Capture" window.Transfer of image stored in the personal computerThe images stored in the PC can be transmitted to the projector.The functions on "Image List" screenWhen the user right-click the icon on the task bar and choose "Image List", the"Image List" appears.1. Choosing an image folderSpecify the folder to manage those images to be transmitted to the projector.If the specified folder contains some images, they are displayed in the thumbnaildisplay section (17).2. "Add" buttonAn image will be added to the folder selected in the image folder (1).Choose the image you want to add and click "Open".The images will be added in the frame next to the last one of thumbnail display section (17).11613497 5 10 6 11 2 3 12 1514178