28Turning off the powerq Press the POWER button. “PowerOFF” is displayed on the screen.w Select “OK” using the andbuttons and press the ENTER button.The lamp unit will switch off and the picture will stop being projected. (Thepower indicator on the projector will illuminate orange.)e Wait until the power indicator on the projector illuminates red (untilthe cooling fan stops).Do not in any way cut power to the projector while the cooling fan is stilloperating. Be careful not to switch off the MAIN POWER switch of theprojector, unplug the power cord from the electrical outlet or turn off in-lineswitches such as tabletop power switches.r Press the MAIN POWER switch to the “O” side to turn off the power.NOTE:• After the power is turned off, the lamp unit will take some time to cooldown. If you turn the power back on again before the lamp unit has cooleddown, the lamp unit may not turn on straight away, but it will turn onautomatically after a short period. (During this time, the power indicator onthe projector will flash orange.)• When the projector is in standby mode (the power indicator on theprojector is illuminated red), the projector will still draw a maximum 1.7 Wof power, even when the cooling fan has stopped.• When the WEB STANDBY is set to “ON”, the cooling fan operates and thepower indicator on the projector flashes slowly in red and the projectordraw a maximum 43 W of power. (page 44)• If the MAIN POWER switch is accidentally turned off while the projector isbeing used, the lamp unit may not turn on straight away after the power isturned back on. In such cases, the lamp unit will turn back on automaticallyafter a short period. (During this time, the power indicator on the projectorwill flash green.)• A tinkling sound may be heard while the power indicator is turned off, butthis is not a sign of a malfunction.• You can also turn off the power by pressing the POWER button twice.iTurn the focus ring and the zoomknob to adjust the projected imagefocus and size.ZoomFocusPower OFFOK CANCEL
