55 OthersAbout the RGB INPUT indicatorThe RGB INPUT indicator can be used to check whether an RGB/YPBPRsignal is being input. Refer to the table below for details.RGB INPUTindicator statusPower supply statusOn (projecting)StandbyA signal is being input toeither the RGB1 IN orRGB2 IN connector.A signal is being input tothe connector selectedusing the input selectbuttons.No signal is being input toeither the RGB1 IN orRGB2 IN connector.No signal is being input tothe connector selectedusing the input selectbuttons.IlluminatedSwitched offAbout the automatic setup functionIf you press the AUTO SETUP button, the items given in the table below willbe set automatically. The setting details change according to the signalwhich is being input. Refer to the table below for details.VIDEO/S-VIDEO/NETWORK/SD CARDYPB PRDot Clockfrequencyis 140 MHzor higherSignal otherthan aboveHorizontal/verticalpositionDot clock/clock phaseAuto RGBinput selectAutomaticverticalkeystonecorrectionYesYesYesYesYes NoNOTE:• If the edges of the projected picture are indistinct, or if a dark picture is beingprojected, the automatic setup processing may stop automatically before it iscomplete. If this happens, project a different picture and then press the AUTOSETUP button once more, or make the above adjustments manually.• If you would like to make further adjustments to the picture, use the menucommands which are listed on page 29 and subsequent pages.
