Panasonic PT-VW435NU Operating Instructions Manual

Also see for PT-VW435NEA: Service manual

Contents

Panasonic PT-VW435NU Operating Instructions Manual Manual pdf 30 page image

Setting up30 - ENGLISHGetting StartedAdjusting front adjustable feetLift the front of the projector and press the feet lock latches on both side of the projector.Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height and tilt.You can turn the front adjustable feet to extend them. You can turn them in the opposite direction to contractthem.(You can adjust the projection angle vertically.)AttentionHeated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjustzthe front adjustable feet.If keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Screen” menu. (z Æpage 55)NoteScrew up the adjustable feet, and an audible click will be heard as the limit.zAdjustable rangeFront adjustable feet : 48.5 mm(1.909")Feet Lock LatchesAdjusting the position using the vertical lens shift functionIf the projector is not positioned right in front of the center of the screen, you can adjust the vertical position ofprojected image by moving the vertical lens shift ring within the shift range of the lens.Lens shift adjustment for PT-VX505NU1 )Lens shift adjustment for PT-VW435NU2 )The display position can be shifted upward upto 40% elevation of the display. (When turnthe vertical lens shift ring to the right (left), thedisplay moves up (down)).The display position can be shifted upwardup to 48% elevation of the display. (Whenturn the vertical lens shift ring to the right(left), the display moves up (down)).AttentionPlease note the followings when using the projector.Do not touch the lens while it is moving as this could cause injury to the fingers.zNever allow children to touch the lens.z40%Lens shift adjustable rangeShift rangeLens shift centerpositionLens shift adjustable range48%Shift rangeLens shift centerposition