ENGLISH - 45 SettingsInput menuSelect [Input] from the Main Menu (see“Navigating through the menu” on page 42),then select the item from the sub-menu.Remote Control Control PanelComputer 1: RGB/Component/RGB (Scart)Press ▲▼ to select [Computer 1].1 )Press ► to access the submenu.2 )Press ▲▼ to select RGB, Component3 )or RGB(Scart) and then press the button.Computer 2: RGBPress ▲▼ to select [Computer 2 (RGB)]and then press the button.J Computer System SelectionThis projector automatically tunes to various typesof computers with its Multi-scan system and AutoPC Adjustment. If a computer is selected as a signalsource, this projector automatically detects the signalformat and tunes to project a proper image withoutany additional settings. (Signal formats provided inthis projector are shown on pages 110-113.)When the projector can not recognizethe connected signal conforming to theprovided PC Systems, [Auto] is displayedon the System Menu box and the AutoPC adjustment function works to displayproper images. If the image is not projectedproperly, a manual adjustment is required.There is no signal input from the computer.Check the connection between yourcomputer and the projector.The preset system is manually adjusted inthe PC adjust Menu. The adjusted data canbe stored in Mode 1-10.PC Systems provided in this projector ischosen. The projector chooses a propersystem provided in the projector anddisplays it.* Mode 1 and SVGA 1 are examples.Press ▲▼ to select [System].1 )Press ► or the button to2 )access the submenu.Press ▲▼ to select the desired system.3 )HDMIPress ▲▼to select [HDMI] and then pressthe button.VideoPress ▲▼ to select [Video] and thenpress the button.S-videoPress ▲▼ to select [S-video] and thenpress the button.J Video System SelectionVideo or S-videoAutoThe projector automatically detects anincoming video system, and adjusts itself tooptimize its performance.When Video System is [PAL-M] or [PAL-N],select the system manually.PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-NIf the projector cannot reproduce proper videoimage, select a specific broadcast signalformat from among [PAL], [SECAM], [NTSC],[NTSC 4.43], [PAL-M] and [PAL-N].AUTO- - - -Mode 1SVGA 1
