NetworkENGLISH - 73 SettingsAMX D.D.This function allows the projector to be detected byAMX Device Discovery. For more details, visit http://www.amx.com/.Press ▲▼ to select1 ) [AMX D.D.].Press2 ) button or the ►button to select [On] or [Off] to allowthe projector to be detected by AMXDevice Discovery.RoomViewThis function allows the projector to monitor andcontrol the projector through network with CrestronRoomView ® .Press ▲▼ to select1 ) [RoomView].Press2 ) button to select [On]or [Off] with the ▲▼ buttons.This projector supports the following applicationsoftware from Crestron company.• RoomView® Express• Fusion RV™• RoomView® Server Edition"Crestron RoomView" is a system developed byCrestron Electronics, Inc. which collectively manageand control multiple system devices connected viathe network, from a computer. This projector supports"Crestron RoomView".For details of "Crestron RoomView", refer to the CrestronzElectronics, Inc. website. (Provided only in English.).http://www.crestron.com/.For the download of "RoomView Express", refer to theCrestron Electronics, Inc. website. (Provided only inEnglish.).http://www.crestron.com/getroomview.Memory viewerSelect [Network] in the main-menu and1 )then press ► or button.Select [Memory viewer] with Point ▲▼2 )buttons and press button.Select [Start] and press 3 )button.*The image file stored in the root directory of theUSB thumb drive is displayed on the screen.*If the image file is not available in the rootdirectory of the USB thumb drive, the memoryviewer browser window appears.NoteThe Memory Viewer function is available only when thezUSB thumb drive is inserted, otherwise, it will grayout.For details, see the “Memory Viewer function” of thezNetwork menu. (Æpage 90-93)Network factory defaultYou can reset the network setting to the factorydefault of the projector.Press ▲▼ to select [Network factory1 )default], and press button.A confirmation box appears and select2 )[Yes] and then press button.Another confirmation box appears andselect [Yes] and then press button.
