Panasonic PT-VW435NU Operating Instructions Manual

Also see for PT-VW435NEA: Service manual

Contents

Panasonic PT-VW435NU Operating Instructions Manual Manual pdf 54 page image

54 - ENGLISHSettingsScreenSelect [Screen] from the Main Menu (see“Navigating through the menu” on page 42),then select the item from the sub-menu.Remote Control Control PanelNormalProvide the image to fit the screen size whilemaintaining the aspect ratio of the input signal.Press ▲▼ to select [Normal] and thenpress the button.FullProvide the full screen image.Press ▲▼ to select [Full] and then pressthe button.Wide(16:9)Provide the image at the 16:9 wide screen ratio.Press ▲▼ to select [Wide(16:9)] and thenpress the button.ZoomScale the image proportionally to fit the entire screen.Either side of image may go over the screen.Press ▲▼ to select [Zoom] and thenpress the button.TrueProvide the image in its original size. When theoriginal image size is larger than the panel size *, theprojector enters to the panning mode automatically.Press ▲▼ to select [True] and then1 )press the button.Press ▲▼◄► to pan the image.2 ) When adjusted, the arrows will turn red. Whenzreached to the correction limits, the arrows willdisappear.* Panel size (1 280 x 800) is only for PT-VW435NU.Panel size (1 024 x 768) is for PT-VX505NU.NoteWhen input computer signal to the projector, [True] willzbe available.[True] is disabled and cannot be displayed when [480i],z[576i], [480p], [576p], [720p], [1 035i] or [1 080i] isselected in the PC System Menu.When [True] is selected in the Screen menu, [Digitalzzoom +/-] can not be selected.Natural wide(PT-VW435NU Only)Modify the 4:3 aspect ratio image to fit the screen sizeby stretching the image to make it look natural.Press ▲▼ to select [Natural wide] andthen press the button.NoteWhen input video signal to the projector, [Natural wide]zwill be available.[Natural wide] is not available when [720p], [1 035i] orz[1 080i] is selected in the PC System Menu.CustomProvide the last stored aspect screen image.Press ▲▼ to select [Custom] and pressthe button.