ENGLISH - 55 SettingsCustom adj.Adjust the screen scale and position manually withthis function.Press ▲▼ to select [Custom adj.].1 )Press ► or the button to2 )enter the next submenu.Press ▲▼ to choose the item you3 )want to adjust.You can choose one from the items as below:zScale H/V Adjust the Horizontal/Vertical screenscale.H&V When set to [On], the aspect ratio isfixed.Position H/V Adjust the Horizontal/Vertical screenposition.Common Save the adjusted scale or positionto all the inputs.Reset Reset the all adjusted values.Digital zoom +Zoom in the images.Press ▲▼ to select [Digital zoom +]1 )and then press the button.The On-Screen Menu disappears andz[D. zoom + ] appears.Press the button to zoom in2 )the image size and press ▲▼ ◄► tomove the image to the top/bottom/left/right of the screen.The Panning function can work only when thezimage is larger than the screen size. A projectedimage can be also expanded by pressing the or the button.Digital zoom –Zoom out the images.Press ▲▼ to select [Digital zoom –]1 )and then press the button.The On-Screen Menu disappears andz[D.zoom –] appears.Press the button to zoom2 )out image size.The projected image can be also compressedzby pressing the or the button.To exit the Digital zoom +/– mode, press any buttonexcept the , and ▲▼◄►buttons.To return to the previous screen size, select a screensize from the Screen Size Adjustment Menu or selectan input source from the Input Source Selection Menu(Æpage 45) again, or adjust the screen size with the buttons.NoteWhen input computer signal to the projector, [D.ZOOMz+/–] will be available.[Digital zoom +/-] cannot be selected when [True] iszselected in the Screen menu .[Digital zoom -] cannot be selected when [Custom] iszselected in the Screen menu .[Digital zoom +/–] are disabled and cannot be displayedzwhen [480i], [576i], [480p], [576p], [720p], [1 035i] or[1 080i] is selected in the PC System Menu (Æpage 46 ).When [Digital zoom +/–] functions are disabled,z markwill appear.KeystoneThis function is used to adjust keystone distortion ofthe projected image.Press ▲▼ to select [Keystone].1 )Press ► or the button.2 )Press ▲▼ to choose the item you3 )want to adjust.Keystone To correct keystone distortionStore To store or reset the keystonecorrectionStoreKeep the keystone correction everwhen the AC power cord is pluggedout or turned off the projector.ResetRelease the keystone correctionwhen the AC power cord is pluggedout.NoteFor more details about the keystone correction, refer toz"Using the KEYSTONE button" (page 39).ScreenThe following items are thesubmenu of [Store].
