Panasonic PT-VW435NU Operating Instructions Manual

Also see for PT-VW435NEA: Service manual

Contents

Panasonic PT-VW435NU Operating Instructions Manual Manual pdf 93 page image

NetworkENGLISH - 93 SettingsTermination of memory viewerJTo terminate the memory viewer function, take one of methods described below. Terminate with projector’s on-screen menu.1. Select “Wired” or “Wireless” from the input menu of the projector. Press button.2. Select “Memory Viewer” with the point ▲▼ buttons and press button. The “Enter/Exit” pallet ofthe memory viewer appears.3. Select “Exit” and press button. Terminate with memory viewer mode1. During the image displaying, press button. The browser window appears onthe screen.2. Press button again. The cursor moves to menu item.3. Select “Exit” on the browser window with the point ◄► buttons and press button. Terminate with plugged out the USB thumb directly.Formatting the USB thumb driveJA new USB thumb drive or a USB thumb drive formatted by computer or camera must be formatted bythis product. Memory Viewer function may not operate properly with a USB thumb drive formatted byother equipment.1. In the memory viewer mode, press button. The browser window appears onthe screen.2. Press button again. The cursor moves to menu item.3. Select “Format” from “Set” with the point buttons and press button. The format confirmationwindow appears.4. Select “OK” with the ◄► buttons and press button to start formatting. It takes about 1-2seconds to complete the formatting.Note Formatting the USB thumb drive may delete all the stored data, please backup the data you need beforeformatting. During formatting the USB thumb drive, do not turn off the power or eject the USB thumb drive because thedata in the USB thumb drive might get damaged. During formatting, the USB thumb drive is blinking.