NetworkENGLISH - 79 SettingsError information pageJIf [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen,click the part to display the details of the error.Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.•When [FAILED] has appeared for an itemParameter DescriptionFAN Trouble has occurred in the fan or its drive circuit. Consult your dealer.INTAKE AIR TEMPERATUREIntake air temperature is high. It could be because it is used in an environment of hightemperature such as close to a heating device, etc., the air intake is blocked, or the airfilter is clogged.EXHAUST AIR TEMPERATURE Exhaust air temperature is high. Exhaust may be blocked, or [Fan control] mode maybe set wrong. (Refer to [Fan control] (Æpage 63-64))OPTICS MODULE TEMPERATURE Optics module temperature is high.LAMP REMAIN TIME The lamp runtime has exceeded the prescribed cumulative time, and it is now time toreplace the lamp.LAMP STATUS The lamp has failed to light.Wait a short while for the lamp to cool off, and then turn on the power.APERTURE (CONTRAST-SHUTTER) Trouble has occurred in the contrast shutter circuitry. Consult your dealer.OK: Normal operationFAILED: Occurrence of troubleWARNING: Abnormal conditionNetwork status pageJDisplays the current configuration information of the network.211 Displays the configuration details of wireless LAN.2 Displays the configuration details of wired LAN.
