Panasonic PT-VW435NU Operating Instructions Manual

Also see for PT-VW435NEA: Service manual

Contents

Panasonic PT-VW435NU Operating Instructions Manual Manual pdf 71 page image

NetworkENGLISH - 71 SettingsSet [EAP], [USER NAME],and [PASSWORD].EAP 1: Select the EAPsetup in theRADIUS server1. Types ofEAP that can beselected are asfollows.PEAP 1(MS-CHAPv2 1),PEAP 1(GTC1),EAP-TTLS1(MD5 1),EAP-TTLS1(MS-CHAPv21), EAP-FAST1(MS-CHAPv21), EAP-FAST1(GTC 1)USERNAME:Input a username used forauthentication(excludingspaces)(maximum 64characters).PASSWORD:Input apasswordused forauthentication(maximum 64characters).1: “Glossary” ( Æpage 117 – 118)NoteIf you are unable to connect to the wireless LANzthrough the access point even after performing thesteps in “Projector settings (Æpage 76)”, contact themanufacturer of the access point.When using EAP, the projector needs to be set accordingzto the setting of the RADIUS server. Check with thenetwork administrator for the setting of the RADIUSserver.When using an EAP together with an access point withzinvalid SSID broadcast, select WAP-EAP or WAP2-EAPfor the authentication method even if the authenticationmethod of the access point is WPA-EAP/WPA2-EAP.Default settings of [USER 1] - [USER 3]The following settings as [USER1] - [USER3] in thewireless LAN are set before the projector leaves thefactory.SSID Panasonic ProjectorDHCP OffIP address 192.168.11.100Subnet mask 255.255.255.0Default gateway 192.168.11.1Mode AD HOCAuthentication OPENEncryption NONEChannel 11DNS 1/DNS 2 NONEPress ▲▼◄► to select [Set], and press5 ) button.Save the current network settingsNoteWhen configuration is completed, you need to select [Set]zand press the button. At this point, select [Back]to go back to the previous screen (2/3), or select [Cancel]to cancel the configuration change.Sending image from iPad / iPhone /iPod touchBy using the dedicated application, you can send thePDF file or the JPEG image which stored on your iPad/ iPhone / iPod touch to the projector for projecting.For details, please enter the following URL.http://panasonic.net/avc/projector/Projector nameYou can change the projector name to be displayedon the network.Press ▲▼ to select [Projector name],1 )and press button.Select characters with the ▲▼◄►2 )buttons and press the button to enter the projector name.Select [BS] to delete one character selectedwith the cursor in the input box and press the button.Select [Set] with the ▲▼◄► buttons3 )and press the button.Select [Cancel] to undo the changes and thenpress the button.Select [YES] or [No] with the ▲▼4 )buttons and press the button.Note[Namez ] ( is four-digit number) is setbefore the projector leaves the factory.