Panasonic PT-VX400NTEA Operating Instructions (functional Manual)

Also see for PT-VX400NTEA: Operating instructions

34 - ENGLISHBasic OperationProjectingAdjusting the imageautomaticallyEasy setting function makes the semi-automaticallyadjustment possible, so that to get the optimal image.Auto setup function including these following functions(Æpage 56-57).Input search Switching the input signalautomatically.Auto PC adj. The image projected from thecomputer automatically is optimal.Focus assist The color of the bar assists the focusadjustment.Screen fitDetect and correct the imageautomatically to fit the frame. Ifyou can not detect the frame ofthe screen, Keystone (standard)executes automatically.ColorboardThe color values will changeautomatically to reach the optimalwhite balance according to the colorof screen.J Auto setupWhen all of the above mentioned functions are set to[On], the adjustment orders are as follows.Project an image.1 )Adjust the zoom ring so that the image is2 )larger than the screen frame.Press the button on the remote3 )control or the button on thecontrol panel during projection.[Please wait ...] appears, Input search functionstarts to work and select an input signal.If the input signal is an computer (analog)signal, Auto PC adj. function starts to workand get an optimal image.Next, a test pattern for [Focus assist] appearson the screen and the focus assist bar appearsin the center bottom of the screen.Rotate the focus ring until the bar changes to4 )blue and the image reaches to the maximumlevel.Adjusting the image manuallyCheck the connections of the peripheral devices andconnection of the power cord (Æpage 29) and switchon the power (Æpage 31) to start the projector.Selecting the imageJSelect an input signal.The image selected with the ,, ,

or button is projected (Æpage 38).AttentionImages may not be projected properly depending on thezconnected device and DVD, video tape, etc. to be played.Select a system format that is suitable for the input signalin [Component] or [RGB] in the [Input] menu (Æpage 43).Check the aspect ratio of the screen and the image andzselect the optimum aspect ratio under the [Screen] menu(Æpage 52).Adjusting the state of the imageJAdjust the projection angle1 ) For details, see “Adjusting front adjustable feet”z(Æpage 27).Adjust the zoom and the focus2 ) Turn [Zoom lever] and [Focus ring] to adjust theimage.NoteIf you adjust the focus, you may need to adjust the sizezof the image by moving the zoom lever again.If keystone distortion occurs, see “KEYSTONE”z(Æpage 53).Focus ring Zoom Lever