Panasonic PT-VX400NTEA Operating Instructions (functional Manual)

Also see for PT-VX400NTEA: Operating instructions

Read this first!6 - ENGLISHImportantInformationWARNING:ACCESSORIESDo not use or handle the batteries improperly, and refer to the following.Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.Do not use unspecified batteries.zDo not disassemble dry cell batteries.zDo not heat the batteries or place them into water or fire.zDo not allow the + andz - terminals of the batteries to come into contact with metallic objects such asnecklaces or hairpins.Do not store batteries together with metallic objects.zStore the batteries in a plastic bag and keep them away from metallic objects.zMake sure the polarities (+ andz -) are correct when inserting the batteries.Do not use a new battery together with an old battery or mix different types of batteries.zDo not use batteries with the outer cover peeling away or removed.zRemove the empty batteries from the remote control at once.zInsulate the battery using tape or something similar before disposal.zDo not allow children to reach the batteries (AAA/R03 or AAA/LR03 type).The battery can cause personal injury if swallowed.zIf swallowed, seek medical advice immediately.zIf the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary.Battery fluid on your skin or clothing could result in skin inflammation or injury.zRinse with clean water and seek medical advice immediately.Battery fluid coming in contact with your eyes could result in loss of sight.zIn this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.Do not disassemble the lamp unit.If the lamp breaks, it could cause injury.Lamp replacementThe lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents willresult.The lamp can easily explode if struck against hard objects or dropped.zBefore replacing the lamp, be sure to disconnect the power plug from the wall outlet.zElectric shocks or explosions can result if this is not done.When replacing the lamp, turn the power off and allow the lamp it to cool for at least 45 minutes beforezhandling it otherwise it can cause burns.Do not allow infants or pets to touch the remote control unit.Keep the remote control unit out of the reach of infants and pets after using it.zDo not use the supplied power cord with devices other than this projector.Using the supplied power cord with devices other than this projector may cause short circuits orzoverheating, and result in electric shock or fire.Remove the depleted batteries from the remote control promptly.Leaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.z