Panasonic PT-VX400NTEA Operating Instructions (functional Manual)

Also see for PT-VX400NTEA: Operating instructions

Setting60 - ENGLISHSettingsAttentionWhen selecting [Network], the cooling fans may bezrunning depending on the temperature inside theprojector even if the projector is turned off.If [Standby mode] is set to [Eco], the signals comezfrom MONITOR OUT and AUDIO OUT terminal areunavailable.If [Standby mode] is set to [Eco], you can not useznetwork functions when the projector is standing by. Also,you cannot use some RS-232C protocol commands.If set to [Network], you can use network functionszwhen the projector is standing by. Refer to “OperatingInstructions - Network Operations”.P-timerThis function allows you to change the setting of theP-timer and execute it.Press ▲▼ to select [P-timer].1 )Press ► or button.Press▲▼ to set the [Timer](1-180 Min).2 ) Timer is available in [Count down] only. Factoryzdefault value is 10 Min.ExecuteJPress ▲▼ to select one among the1 )items as below and then press the button at [Start] and the*1 :indication changes into [Stop]. To stop [Count up]or [Count down], press the button at [Restart] to resume [Count up] or [Countdown].Press the button to2 )enter the submenu.Closed captionJPress ▲▼ to select [Closed caption]1 )and then press the button.Press▲▼ to select color or white.2 )AttentionThe closed caption is mainly used in the north America.zThis function shows the text information contained in theimage signal. Captions may not be displayed on somedevices or software.You can select [Closed caption] when [NTSC] or [480i]zsignals are input.Part of characters may not displayed when highzcompensation valued are set in [Keystone].Closed captions are not displayed while the menu screenzappears.