Panasonic PT-VX400NTEA Operating Instructions (functional Manual)

Also see for PT-VX400NTEA: Operating instructions

82 - ENGLISHAppendixSpecificationsModel No. PT-VX400NTEAPower supply AC100 V - 240 V 50 Hz/60 HzPower consumption100 V - 240 V 3.8 A-1.8 A 322 WWhen [Standby mode] of [Setting] is set to [Eco]:0.48 W (100 V - 120 V), 0.5 W (220 V - 240 V)When [Standby mode] of [Setting] is set to [Network]: 14.5WWhen [Standby MIC out] of [Sound] is set to [On]: Max.26 WLCD panelPanel size 1.6 cm(0.63")(aspect ratio 4 : 3)Display method 3 transparent LCD panels (RGB)Drive method Active matrix methodPixels 786 432(1 024 x 768) x 3 panelsLens Manual zoom (1.6x) / Manual focusF 1.65 to 2.33, f 15.47 mm to 24.53 mmLuminous lamp 245 W UHP lampLight output *1 4000 lm (ANSI)Applicablescanningfrequency*2for RGB signal Horizontal 15 kHz to 100 kHz, Vertical 50 Hz to 100 HzDot clock frequency: 140 MHz or lessfor YPBPR signal[525i(480i)] Horizontal 15.75 kHz, Vertical 60 Hz[525p(480p)] Horizontal 31.5 kHz, Vertical 60 Hz[750(720)/60p] Horizontal 45 kHz, Vertical 60 Hz[1125(1080)/60i] Horizontal 33.75 kHz, Vertical 60 Hz[625i(576i)] Horizontal 15.63 kHz, Vertical 50 Hz[625p(576p)] Horizontal 31.25 kHz, Vertical 50 Hz[750(720)/50p] Horizontal 37.5 kHz, Vertical 50 Hz[1125(1080)50i] Horizontal 28.13 kHz, Vertical 50 HzHD/SYNC and V terminals are not compliant with 3 value composite SYNCzfor Video signal(includingS-video)Horizontal 15.75 kHz / 15.63 kHz, Vertical 50 Hz / 60 Hzfor HDMI signal525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60p, 1125(1080)/50p,1125(1080)/60i, 1125(1080)/50iDisplayable resolution: VGA to WUXGA (non-interlace)zDot clock frequency: up to 162 MHzzColor system 7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60 )Projection size 0.76 m - 7.62 m (30"-300")Screen aspect ratio 4 : 3Projection scheme Front / Rear / Mount on Ceiling / Floor (Menu setting system)Speaker 1 (3.7 cm round-type)Maximum usable volumeoutput 10WContrast ratio *1 2000 : 1 (all white / all black)Measurement, measuring conditions and method of notation all comply with ISO21118 international*1 :standards.*2 : For details of video signals that can be projected using this projector, refer to “List of compatible signals”.(Æpage 78-81)