Panasonic PT-VX400NTEA Operating Instructions (functional Manual)

Also see for PT-VX400NTEA: Operating instructions

Read this first!4 - ENGLISHImportantInformationWARNING:POWERThe wall outlet or the circuit breaker shall be installed near the equipment and shall be easilyaccessible when problems occur. If the following problems occur, cut off the power supplyimmediately.Continued use of the projector in these conditions will result in fire or electric shock.If foreign objects or water get inside the projector, cut off the power supply.zIf the projector is dropped or the cabinet is broken, cut off the power supply.zIf you notice smoke, strange smells or noise coming from the projector, cut off the power supply.zPlease contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.During a thunderstorm, do not touch the projector or the cable.Electric shocks can result.Do not do anything that might damage the power cord or the power plug.If the power cord is used while damaged, electric shocks, short-circuits or fire will result.Do not damage the power cord, make any modifications to it, place it near any hot objects, bend itzexcessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.Insert the power plug securely into the wall outlet.If the plug is not inserted correctly, electric shocks or overheating will result.Do not use anything other than the provided power cord.zDo not use the provided power cord for other electrical equipment.zDo not use plugs which are damaged or wall outlets which are coming loose from the wall.zClean the power plug regularly to prevent it from becoming covered in dust.Failure to observe this will cause a fire.If dust builds up on the power plug, the resulting humidity can damage the insulation.zIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.zPull the power plug out from the wall outlet and wipe it with a dry cloth regularly.Do not handle the power plug with wet hands.Failure to observe this will result in electric shocks.Do not overload the wall outlet.If the power supply is overloaded (ex., by using too many adapters), overheating may occur and fire will result.ON USE/INSTALLATIONDo not place liquid containers on top of the projector.If water spills onto the projector or gets inside it, fire or electric shocks will result.If any water gets inside the projector, contact an Authorized Service Center.Do not place the projector on soft materials such as carpets or sponge mats.Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector.Do not set up the projector in humid or dusty places or in places where the projector may come intocontact with oily smoke or steam, ex. a bathroom.Using the projector under such conditions will result in fire, electric shocks or components deterioration.Components deterioration (such as ceiling mount brackets) may cause the projector which is mounted on theceiling to fall down.Do not install this projector in a place which is not strong enough to take the full weight of theprojector or on top of a surface which is sloped or unstable.Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damagecould result.Do not place another projector or other heavy objects on top of the projector.Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage orinjury. The projector will be damaged or deformed.