ENGLISH -53SettingsScreenDigital zoom +Zoom in the images.Press ▲▼ to select [Digital zoom +]1)and then press the The On-Screen Menu disappears andz[D. zoom + ]appears.Press the 2)the image size andpress ▲▼ ◄► tomove the image to the top/bottom/left/right of the screen.The Panning function can work only when thezimage is larger than the screen size. A projectedimage can be also expanded by pressing the or the Digital zoom -Zoom out the images.Press ▲▼ to select [Digital zoom -]1)and then press the The On-Screen Menu disappears andz[D. zoom - ]appears.Press the 2)out image size.The projected image can be also compressedzby pressing the or theTo exit the Digital zoom +/– mode, press any buttonexcept the , buttons.To return to the previous screen size, select a screensize from the Screen Size Adjustment Menu or selectan input source from the “Input Source SelectionMenu” (Æpage 43) again, or adjust the screen sizewith the buttons.NoteWhen input computer signal to the projector, this functionzwill be available.[Digital zoom +/-] cannot be selected when [True] iszselected in the Screen menu.[Digital zoom -] cannot be selected when [Custom] iszselected in the Screen menu.[Digital zoom +/–] are disabled and cannot be displayedzwhen [480i], [576i], [480p], [576p], [720p], [1035i] or[1080i] is selected in the PC System Menu(Æpage 44).When [Digital zoom +/–] functions are disabled,zmarkwill appear.KeystoneThis function is used to adjust keystone distortion ofthe projected image.Press ▲▼ to select [Keystone].1)Press ► or the 2)Press ▲▼ to choose the item you3)want to adjust.StandardAdjust the Horizontal/Verticalkeystone distortion of the projectedimage.CornercorrectionAdjust the corner distortion of theprojected image.CornerpatternChoose a Corner pattern modeamong Red, White, Blue, and Off.StoreTo store or reset the keystonecorrection.StoreKeep the keystone correctioneven when the AC power cord isunplugged.ResetRelease the keystone correctionwhen turn off the projector.NoteFor details, see “Using the KEYSTONE button” of "Basiczoperation by using the remote control"(Æpage 37).CeilingThis function is used to project the image from aceiling-mounted projector.Press ▲▼ to select [Ceiling] and then1)press the Press ▲▼ to change the image.2)When this function is set to [On], the picture willzbe top/bottom and left/right reversed.The following items is thesubmenu of [Store].
