Panasonic PT-VX400NTEA Operating Instructions (functional Manual)

Also see for PT-VX400NTEA: Operating instructions

ENGLISH - 43 SettingsInput menuSelect [Input] from the Main Menu (see“Navigating through the menu” on page 40),then select the item from the sub-menu.Remote Control Control PanelComputer 1: RGB/Component/RGB (Scart)Press ▲▼ to select [Computer 1].1 )Press ► to access the submenu.2 )Press ▲▼ to select RGB, Component3 )or RGB(Scart).Press the button.J Computer System SelectionThis projector automatically tunes to various typesof computers with its Multi-scan system and AutoPC Adjustment. If a computer is selected as a signalsource, this projector automatically detects the signalformat and tunes to project a proper image withoutany additional settings. (Signal formats provided inthis projector are shown on pages 78-81.)AUTO When the projector can not recognizethe connected signal conforming to theprovided PC Systems, Auto is displayedon the System Menu box and the Auto PCadjustment function works to display properimages. If the image is not projectedproperly, a manual adjustment is required.There is no signal input from the computer.Check the connection between yourcomputer and the projector.The preset system is manually adjusted inthe PC adjust Menu. The adjusted data canbe stored in Mode 1-10.PC Systems provided in this projector ischosen. The projector chooses a propersystem provided in the projector anddisplays it.* Mode 1 and SVGA 1 are examples.Press ▲▼ to select [System].1 )Press ► or the button.VideoPress ▲▼ to select [Video] and thenpress the button.J Video System SelectionVideo or S-videoAutoThe projector automatically detects an incoming videosystem, and adjusts itself to optimize its performance.When Video System is [PAL-M] or [PAL-N], select thesystem manually.- - - -Mode 1SVGA 1