SettingENGLISH -63SettingsFilter counter resetJAfter replacing the filter, be sure to reset the timer.Press ▲▼ to select [Filter counter1)reset].Press the 2)[Filter counter Reset?] appears. Select [Yes]zto continue. Another confirmation dialogbox appears, select [Yes] to reset the [Filtercounter].Total power savingsThis function displays the saved amount of power andthe exhausted CO2 of the projector.Press ▲▼ to select [Total power1)savings] and then press the button.Show the total accumulated power savings ofzthe projector and display the total amount ofCO2 exhausted from the projector.Press the 2)the figures of the total power savingsand the exhaustedCO2.[Total power savings Reset?] appears. Selectz[Yes] to continue. Another confirmation dialogbox appears, select [Yes] to reset the [Totalpower savings].Warning logThis function records anomalous operations while theprojector is in operation and use it when diagnosingfaults.Press ▲▼ to select [Warning log].1)Press ► or the 2)display the latest warning message.Up to 10 warning logs are displayed with thezlatest warning message at the top of the list,followed by previous warning messages inchronological order.AttentionWhen the [Factory default] function is executed, allzthe warning log records will be deleted.Factory defaultThis function returns all setting values except for the[User logo], [IN code lock], [Logo PIN code lock], [Filtercounter ] and [Total power savings] to the factorydefault settings.Press ▲▼ to select [Factory default].1)Press the 2)[Return to Factory default?] appears. Selectz[Yes] to continue. Another confirmation dialogbox appears, select [Yes] to return to [Factorydefault].