terminal and terminal pin assignments and signal namesOutside view Pin No. Signal names Pin No. Signal namesT.M.D.S data 2+ T.M.D.S clock shieldT.M.D.S data 2 shield T.M.D.S clock -T.M.D.S data 2- CECT.M.D.S data 1+ —T.M.D.S data 1 shield SCLT.M.D.S data 1- SDAT.M.D.S data 0+ DDC/CEC GNDT.M.D.S data 0 shield +5VT.M.D.S data 0- Hot plug detectionT.M.D.S clock +Connecting example : AV equipmentD-sub / componentConversion cableAudio equipmentBlu-ray disc player withHDMI terminalDVD playerVideo deck(TBC built-in) MICAttentionf Always use one of the following when connecting a VCR.- A VCR with built-in time base corrector (TBC).- A time base corrector (TBC) between the projector and the VCR.f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector(TBC) between the projector and the external devices.Notef For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform toHDMI standards is used, images may be interrupted or may not be displayed.f This projector does not support the Viera link (HDMI).f When input the Y/C signal to the terminal, please prepare a necessary D-SUB - S Video conversioncable (ET-ADSV).f If the [AUDIO IN SELECT] settings are incorrect, the projector may have malfunctions such as the absence of audio.f When the terminal is connected with cable, the sound will not be output from the built-in speaker.Odd-numbered pins toEven-numbered pins toD-SUB - S Videoconversion cableS-video cableDVD playerENGLISH - 37Chapter 2 Getting Started - Connecting
