Notef Pressing the button while the menu screen is displayed returns to the previous menu.f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannotbe adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAMELOCK] may not be displayed depending on the input signal.f Some items can be adjusted even if signals are not input.f Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.f For menu items, refer to “Main menu” (Æ page 54) and “Sub menu” (Æ page 54).Resetting adjustment values to the factory defaultIf the button on the remote control is pressed, the values adjusted in the menu items are restored to the factorydefault settings.button1) Press the button on the remote control.Notef You cannot reset all the settings to the factory default at a time.f To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP]menu → [INITIALIZE ALL]. (Æ page 84)f Some items cannot be reset by pressing the button. Adjust each item manually.Main menuThe main menu consists of the following 7 menu items.When a main menu item is selected, the screen changes to a submenu selection screen.Main-menu item Page[PICTURE] 57[POSITION] 62[LANGUAGE] 70[DISPLAY OPTION] 71[PROJECTOR SETUP] 78[SECURITY] 85[NETWORK/USB] 88Sub menuThe sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the submenu.[PICTURE]Sub-menu item Factory default Page[PICTURE MODE] [STANDARD]*1 5754 - ENGLISHChapter 4 Settings - Menu Navigation