Panasonic PT-VZ575N Operating Instruction

Also see for PT-VW535N: Operating instructions Operating instructions

Contents

Basic operations by using the remote controlUsing the AUTO SETUP functionThe automatic setup function can be used to automatically adjust the resolution, clock phase, and image position whenanalog RGB signals consisting of bitmap images such as computer signals are being input. Supplying images with brightwhite borders at the edges and high-contrast black and white characters is recommended when the system is in automaticadjustment mode.Avoid supplying images that include halftones or gradation, such as photographs and computer graphics.button1) Press the button on the remote control.f You can also press the button on the control panel.Notef The [CLOCK PHASE] may shift even if it has completed without any incident. In such cases, adjust the [POSITION] menu →[CLOCK PHASE]. (Æ page 68)f Automatic adjustment may not work depending on the model of the computer and the input signal. And, it may not workproperly when the input signal is a blurred-edge image or a dark image.f Images may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction.f If you press any button on the remote control during the automatic adjustment, the automatic adjustment will be canceled.f If the automatic setup function is used while moving images are being input, the adjustment may not be performed properlyeven for an RGB signal that can use automatic setup.Using the SCREEN ADJ buttonYou can correct the trapezoidal distortion and the curved distortion of the projected image.button1) Press the button to select [KEYSTONE] individual adjustment screen.Or press the button again to select [CORNER CORRECTION] individual adjustment screen.Or press the button again to select [CURVED CORRECTION] individual adjustment screen.f If the value is not adjusted after the individual adjustment screen is display, you can switch the individual adjustmentscreen by pressing the button.2) Press asqw to adjust the value.f After adjusting the value, press the button, you cannot switch to the other individual adjustmentscreen.Notef For more details, refer to the [POSITION] menu → [SCREEN ADJUSTMENT]. (Æ page 62 or 64)46 - ENGLISHChapter 3 Basic Operations - Basic operations by using the remote control