| 
f The items will switch each time you press the button.[AUTO] Enables the auto setup function when switching signals.[BUTTON] Enables the auto setup function only when the button is pressed.[SIGNAL SEARCH]When the power is turned on, this function automatically detects the terminal which signals are input and sets the function toswitch.1) Press as to select [SIGNAL SEARCH].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables input detection automatically.[ON] Enables input detection automatically.Notef If the [SIGNAL SEARCH] is set to [ON] when there is no signal input, press the button on theremote control or on the control panel, this function automatically detects the terminal to which signals are input and thenswitches.[BACK COLOR]Set the display of the projected screen when there is no signal input.1) Press as to select [BACK COLOR].2) Press qw to switch the item.f The items will switch each time you press the button.[BLUE] Displays the entire projection area in blue.[BLACK] Displays the entire projection area in black.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.Notef To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.f If you do not register the image of the [USER LOGO], the projected image will be displayed in black even if the [BACKCOLOR] is set to [USER LOGO].[WIDE MODE]Using this function when displays the incorrect signals input.1) Press as to select [WIDE MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Displays by judging the signal automatically. Set to this mode normally.[ON] When input the wide signal.[OFF] When input the 4:3 signal.[SXGA MODE]This function is used if the whole projected image is not displayed when SXGA signal is input.1) Press as to select [SXGA MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Displays by judging the signal automatically. Set to this mode normally.[SXGA] Switch the item to [SXGA] or [SXGA+] manually if the whole projected image is not displayedwhen SXGA signal is input.[SXGA +]ENGLISH - 75Chapter 4 Settings - [DISPLAY OPTION] menu |
