[FUNCTION BUTTON]The function assigned to the button of the remote control is displayed. You can also release the assignedsetting.Releasing assigned function to the button1) Press as to select [FUNCTION BUTTON].2) Press the button.f The [FUNCTION BUTTON] screen is displayed.3) Press the button.4) When the confirmation message is displayed, select [OK] and press the button.Notef You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (mainmenu, submenu, or details menu), and then pressing the button for at least 3 seconds.[AUDIO SETTING]You can perform more detailed setting for Audio.Adjusting the volume1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [VOLUME].4) Press qw to adjust the level.Operation Adjustment RangePress the w button. Increases the volume. 0 ~ +63Press the q button. Decreases the volume.Setting the mute1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [MUTE].4) Press qw to switch the item.[OFF] Audio is output.[ON] Audio is not output.Setting the audio output during standby1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [IN STANDBY MODE].4) Press qw to switch [IN STANDBY MODE].f The items will switch each time you press the button.[OFF] Disables audio output in the standby mode.[ON]Enables audio output in the standby mode when [STANDBY MODE] is set to [NORMAL].At this time, press the buttons on the remote control or qw buttons on thecontrol panel to adjust the volume.82 - ENGLISHChapter 4 Settings - [PROJECTOR SETUP] menu
