[NAME CHANGE]You can change the projector name, for example, when using the DHCP server.1) Press as to select [NAME CHANGE].2) Press the button.f The [NAME CHANGE] screen is displayed.3) Select characters with the asqw buttons and press the button to enter the projectorname.f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote control todelete a character on the cursor in the entry field.4) Select [OK] with the as buttons and press the button.f To cancel the change of the name, select [CANCEL] and press the button.Notef [Name □□□□] (□□□□ is 4-digit number) is set before the projector leaves the factory.[PASSWORD]By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting andinterrupting projection images, etc.1) Press as to select [PASSWORD].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables the entry of network password.[ON] Enables the entry of network password.Notef Set to [ON] to perform password check when connecting with the projector using “Wireless Manager ME6.2”.(Default: [OFF])f When using the deliver image to all function or the delivered image deletion function of the “Multi Projector Monitoring &Control Software”, image cannot be delivered to the projector with password setting set to [ON]. To use these image deliveryfunctions, set it to [OFF].[PASSWORD CHANGE]1) Press as to select [PASSWORD CHANGE].2) Press the button.f The [PASSWORD CHANGE] screen is displayed.3) Press asqw to set the password.4) Press as to select [OK], and press the button.Notef You can enter 8 characters at most.f Change the password periodically that is hard to guess.[NETWORK CONTROL]Set when you want to control the projector from a computer connected to the network.1) Press as to select [NETWORK CONTROL].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] This function is disabled.[ON] This function is enabled. WEB control, PJLink control, the command control of the LAN areenabled.[AMX D. D.]Set to [ON] to control with the controller of AMX Corporation.Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMXCorporation.URL http://www.amx.com/94 - ENGLISHChapter 4 Settings - [NETWORK/USB] menu
